How to make awesome homemade crab trap

      5
*

How to lớn build a crab trap with pre-cut wire

Step 1:

Cut the baffle piece of wire in the middle and xuất hiện up the cuts.

Bạn đang xem: How to make awesome homemade crab trap

We will flatten up in between the two openings with a hammer.

*
*

Step 2:

Shape the pre-cut 9" X 16" (1"x1" per mesh) into a square bait box and install 4" X 4" top. Then c ring down under the baffle. If you shape the bait box round, you can order 5" X 5" for the top & 5" X 6" for the door to lớn fully cover the bait box. Round bait box is bigger than square even if you use the same piece of wire.

*

Step 3:

Bend the two 38 mesh panels & fasten the frame with baffle and bait box inside. On the 11 mesh trap, the baffle stay on the 5th mesh counting from the bottom of the trap.

Xem thêm: Sửa Chữa Reimage Là Phần Mềm Gì, Thông Tin, Link Download, File Hỗ Trợ

(We normally c-ring on every other mesh and double c ring on the corners).

*
*

Step 4:

Tie the bait box door 5" X 5" piece onto the bait box under the trap and tie the plastic hook with bungee on the front of the trap.

*
*

Step 5:

Install 4 funnels on each sides. Cut 6 meshs off from left to right at the center of each side, depending on the location you will install your escape rings. The staggering-cut pattern looks like this.

*
*

Twist all the funnel wire onto crab trap. You can also use hog rings or c rings khổng lồ firmly secure it on the trap.