How To Reset The Tp

      12

Reconnect a previously installed printer to the Wi-Fi network if you purchased a new router, changed your internet Service Provider (ISP), or changed your network name and password.


Use the Wireless cài đặt Wizard from the printer control panel to connect the printer to your Wi-Fi network.

Bạn đang xem: How To Reset The Tp



From the Wireless or thiết đặt menu, select Network thiết đặt or Settings, và then select Restore Network Settings.


Note:

If the Wireless cài đặt Wizard is not listed, select Wi-Fi Protected setup or WPS, select Push Button, and then follow the steps to lớn connect lớn the network.


Print a Wireless Network demo Report to find information about your printer network connection or to lớn troubleshoot connection issues.


Inkjet printers with a control panel menu: xuất hiện the Wireless, Network Settings, or setup menu lớn locate the các mục of available reports.

Most inkjet printers without a control panel menu: Press the Wireless & Information buttons at the same time, or press the Wireless và Start Copy black

*
buttons at the same time.

LaserJet printers: Press & hold the Wireless button for 10 seconds or until the Ready light blinks, or go to the Wireless menu và select Wireless Network Test.

Laser NS and Neverstop laser printers: Press and hold the Resume và Wireless buttons for 3 seconds.

DeskJet 6000 and 6400, ENVY 6000 and 6400, và Tango printers: Touch và hold the Information button until all control panel buttons light up, & then touch the Information & Resume buttons at the same time.


Review the information on the report, and then follow any instructions provided lớn troubleshoot connectivity problems.


Connect a printer without a touchscreen control panel


For printers without a display, use Wi-Fi Protected thiết lập (WPS), nhatroso.com Smart, or connection settings in the printer homepage.

If one method does not work, try another method.


Connect the printer using the nhatroso.com Smart app


Restore Wi-Fi setup mode on the printer, and then use nhatroso.com Smart khổng lồ connect the printer to your Wi-Fi network.


Restore Wi-Fi thiết đặt mode on the printer

Prepare a printer for a Wi-Fi connection by restoring Wi-Fi thiết đặt mode.


When the settings are restored, the printer enters Wi-Fi thiết lập mode for about two hours, making it discoverable during the nhatroso.com software installation.


Most printers with a touchscreen: From the Wireless or setup menu, select Network setup or Settings, và then select Restore Network Settings.


Most inkjet printers without a touchscreen: Press and hold the Wireless & Cancel buttons until the power button flashes, and then wait for the Wireless light to lớn flash.


Most laser printers without a touchscreen or control panel menu: Press và hold the Wireless button until the Attention

*
and Power lights flash, or press and hold the Wireless and Cancel buttons until the Wireless light flashes (Laser NS, Neverstop). The printer might restart.


Most LaserJet printers without a touchscreen: Press & hold the Wireless button until the Attention light

*
flashes, & then wait for the Wireless light khổng lồ flash.


Envy 6000, 6000e, 6400e, ENVY Pro 6400, DeskJet Plus IA 6000, 6400, và Tango printers: Press và hold the Wireless button on the back of the printer for five seconds until the Status light flashes (blue or purple depending on the model).


Go khổng lồ Restore Wi-Fi thiết lập mode on your nhatroso.com printer for additional information & button presses for more printer models.


Install nhatroso.com Smart

Install the nhatroso.com Smart phầm mềm on your computer or mobile device.


Do the following if you are setting up the printer on a Wi-Fi network.


Place the printer và the computer or sản phẩm điện thoại device near the Wi-Fi router.

Turn on Wi-Fi on your computer or di động device và connect to your network. If the computer is connected lớn the network with an Ethernet cable, temporarily disconnect the cable và use the Wi-Fi connection during the setup.

Enable bluetooth on the computer or smartphone device so that nhatroso.com Smart can detect the printer during the setup.

After installing nhatroso.com Smart for iOS and Android, enable the sản phẩm điện thoại device location service và allow the ứng dụng to use your location to lớn detect the printer và offer solutions during setup.


If you are setting up nhatroso.com Smart for the first time, you must create or sign in khổng lồ an nhatroso.com account to access all printer functions.


In nhatroso.com Smart, click địa chỉ Printer or the plus sign

*
to search for the printer, và then follow the instructions to complete the setup.


Connect the printer using Wi-Fi Protected setup (printers without a touchscreen)


Use the Wi-Fi Protected thiết đặt (WPS) button on your router lớn connect the printer lớn your Wi-Fi network.


Place the printer near the Wi-Fi router.


Put the printer in WPS connection mode.


Most printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts lớn flash.

nhatroso.com Deskjet 6000 và 6400, ENVY 6000 & 6400, and Tango printers: Press & hold the Wi-Fi button and the nguồn button on the back of the printer for five seconds until the xanh bar flashes.


Within two minutes, press & hold the WPS button

*
on the router until the connection process begins.


Wait for the Wireless light or bar on the printer to stop flashing. The printer is now connected lớn the network.


Connect the printer to the network from the printer homepage


Use a Wi-Fi Direct connection khổng lồ access the wireless cài đặt tool from the printer homepage.

Xem thêm:


Place the printer close lớn your computer or thiết bị di động device and to the wireless router.


Turn on the printer, and then make sure ink cartridges are installed and paper is loaded in the tray.


Get the Wi-Fi Direct printer name (Example: DIRECT-72-nhatroso.com Officejet Pro 6970) and password.


Printers with a control panel menu: cảm ứng the Wi-Fi Direct icon or button lớn view the Wi-Fi Direct name và password. Or from the Reports menu, print a Network Summary or Network Config page that lists the details.


*

Printers without a control panel menu: Print a network configuration report or help page. The name & password are listed under the Wi-Fi Direct section.

Use a method to lớn print the page that matches the control panel buttons on your printer.


*

Press the Information button .

Press & hold the Wi-Fi Direct button for 3 seconds.

Press the Wi-Fi Direct and Information buttons at the same time.

Press and hold the Resume button (

*
or
*
) for up lớn 10 seconds or until the report prints.

nhatroso.com DeskJet 6000 & 6400, ENVY 6000 and 6400, and Tango printers: touch và hold the Information button until all control panel buttons light up, và then cảm ứng the Information button & Cancel button

*
at the same time.


On your computer or di động device, open the Wi-Fi or wireless settings khổng lồ view the danh mục of available wireless networks.


Select your Wi-Fi Direct printer name from the list of networks, & then enter the password to connect to lớn the printer.


In a web browser, type 192.168.223.1 into the address bar, và then press Enter.


*

If a login or certificate window displays, complete the information to finish opening the EWS.

If a website security certificate displays, click Continue to mở cửa the printer homepage.

If a login window opens, type admin for the username, và then type the pin found on the label located underneath or on the back of the printer, or the password phối by the printer administrator.


*

From the Network menu, select Wireless (802.11), & then select Wireless cài đặt Wizard.

Follow the instructions to lớn select your Wi-Fi network name và enter the password to complete the connection.

Reconnect lớn the computer or sản phẩm điện thoại device to lớn your Wi-Fi network.


Z7_3054ICK0KGTE30AQO5O3KA3016

nhatroso.com-feedback-input-portlet

Actions
$title
Loading...
Z7_3054ICK0KGTE30AQO5O3KA30H4

nhatroso.com-feedback-banner-portlet

Actions
$title
Loading...
Z7_3054ICK0KGTE30AQO5O3KA30H5

nhatroso.com-country-locator-portlet

Actions
$title
Loading...
Country/Region:
*
Vietnam

Select a location


Americas


Europe, Middle East, Africa


Asia Pacific and Oceania


Select a language


Confirm Back
Z7_M0I02JG0KOT530A6KJKFRQ0816

nhatroso.com-detect-load-my-device-portlet

Actions
$title
Loading...
Z7_M0I02JG0KONJ30ACBBF8MM1084

nhatroso.com-hero-nhatroso.com-search

Actions
$title
Loading...
Search all tư vấn
&resultLimit=10&store=tmsstore&languageCode=en&filters=class:(pm_series_value%5E1.1 OR pm_name_value OR pm_number_value) and (NOT hiddenproduct:yes OR (!_exists_:hiddenproduct)) &printFields=tmspmnamevalue,title,body,childnodes,class,productid,seofriendlyname,shortestnavigationpath"/> Cancel
Examples: "LaserJet Pro P1102 paper jam", "ProBook 440 G3 bios update"

Search help


Tips for better search results Ensure correct spelling & spacing - Examples: "paper jam"Use product model name: - Examples: laserjet pro p1102, DeskJet 2130For nhatroso.com products a sản phẩm number. - Examples: LG534UAFor Samsung Print products, enter the M/C or mã sản phẩm Code found on the sản phẩm label. - Examples: “SL-M2020W/XAA”Include từ khóa along with sản phẩm name. Examples: "LaserJet Pro P1102 paper jam", "ProBook 440 G3 bios update" Need help finding your sản phẩm name or sản phẩm number?

Finding your Serial Number Finding your product Number


Loading Results
Need help?
Some features of the tool may not be available at this time. We apologize for this inconvenience và are addressing the issue.Minimize Chat bot windowLoading ChatbotNew Message
The Virtual Agent is currently unavailable. Please try again shortly.
Need help troubleshooting? Just ask.
nhatroso.com"s Virtual Agent can help troubleshoot issues with your PC or printer.
Try asking nhatroso.com"s Virtual Agent.

Session timed out


Your session on nhatroso.com Customer nhatroso.com has timed out. Please sign back in to lớn continue